The access database file can be created to accept or reject mail from selected domains. For example, you may choose to reject all mail originating from known spammers, or to accept to relay all mail from your local network since now relaying is denied by default with Sendmail -this is an Anti-Spam feature. In the access file example below, we'll allow relaying from localhost and all local network addresses beginning with the IP address 192.168.1.

The files access and access.db are not required for Local or Neighbor Client setups. It is required only if you decide to set up a Central Mail Hub to handle all your mail. Also note that the use of a Central Mail Hub will improve the security and the management of other servers and clients on your network that run Sendmail.

  1. Create the access file touch /etc/mail/access and add the following lines:

               # Description showing bellow for the format of this file comes from
               # the Sendmail source distribution under "cf/README" file.
               #
               # The table itself uses e-mail addresses, domain names, and network
               # numbers as keys. For example,
               #
               #        [email protected]         	REJECT
               #        cyberspammer.com        	REJECT
               #        192.168.212             		REJECT
               #
               # would refuse mail from [email protected], any user from cyberspammer.com
               # (or any host within the cyberspammer.com domain), and any host on the
               # 192.168.212.* network.
               #
               # The value part of the map can contain:
               #
               #        OK           Accept mail even if other rules in the
               #                        running ruleset would reject it, for example,
               #                        if the domain name is unresolvable.
               #        RELAY   Accept mail addressed to the indicated domain or
               #                        received from the indicated domain for relaying
               #                        through your SMTP server.  RELAY also serves as
               #                        an implicit OK for the other checks.
               #        REJECT  Reject the sender or recipient with a general
               #                        purpose message.
               #        DISCARD    Discard the message completely using the
               #                        $#discard mailer.  This only works for sender
               #                        addresses (i.e., it indicates that you should
               #                        discard anything received from the indicated
               #                        domain).
               #        ### any text    where ### is an RFC 821 compliant error code
               #                        and "any text" is a message to return for
               #                        the command.
               #
               # For example:
               #
               #        cyberspammer.com        550 We don't accept mail from spammers
               #        okay.cyberspammer.com   	OK
               #        sendmail.org            		OK
               #        128.32                  		RELAY
               #
               # would accept mail from okay.cyberspammer.com, but would reject mail
               # from all other hosts at cyberspammer.com with the indicated message.
               # It would allow accept mail from any hosts in the sendmail.org domain,
               # and allow relaying for the 128.32.*.* network.
               #
               # You can also use the access database to block sender addresses based on
               # the username portion of the address. For example:
               #
               #        FREE.STEALTH.MAILER@    550 Spam not accepted
               #
               # Note that you must include the @ after the username to signify that
               # this database entry is for checking only the username portion of the
               # sender address.
               #
               # If you use like we do in our "sendmail.mc macro configuration:
               #
               #        FEATURE(`blacklist_recipients')
               #
               # then you can add entries to the map for local users, hosts in your
               # domains, or addresses in your domain which should not receive mail:
               #
               #        badlocaluser            550 Mailbox disabled for this username
               #        host.mydomain.com       550 That host does not accept mail
               #        [email protected]     550 Mailbox disabled for this recipient
               #
               # This would prevent a recipient of [email protected], any
               # user at host.mydomain.com, and the single address
               # [email protected] from receiving mail. Enabling this
               # feature will keep you from sending mails to all addresses that
               # have an error message or REJECT as value part in the access map.
               # Taking the example from above:
               #
               #        [email protected]        	REJECT
               #        cyberspammer.com        	REJECT
               #
               # Mail can't be sent to [email protected] or anyone at cyberspammer.com.
               #
               # Now our configuration of access file,
               # by default we allow relaying from localhost...
               localhost.localdomain   	RELAY
               localhost               		RELAY
               127.0.0.1               		RELAY
               192.168.1				RELAY
               

    NOTE: Don't forget to specify in this file access your private IP address range you want to relay or you'll be unable to send mail from your internal network.

  2. Create the access.db file, remember, since /etc/mail/access is a database, after creating the text file as described above, you must use the makemap utility program to create the database map. To create the access database map, use the following command:

               [root@deep] /# makemap hash /etc/mail/access.db < /etc/mail/access
                

You may need to restart the sendmail daemon for changes to take effect.